Common NTP Server Terminology Explained

Much of the terminology associated with computer time synchronisation and NTP servers can be quite obscure. This article attempts to explain in simple language some of the terminology used in computer timing applications.

NTP: NTP is the short hand name given to the Network Time Protocol; it is a standard protocol for distributing time around the internet and computer networks. Precise time is passed from accurate time references to network time clients for the purpose of synchronisation.

NTP Server: A NTP Server is a device that obtains precise time from an external timing reference such as GPS and provides a precise timing resource to computer networks.

Stratum: The Stratum or level of a NTP time server denotes its position in the network timing heirachy. A stratum 1 NTP server obtains time from an external timing reference. Stratum 2 devices obtain time from stratum 1 devices and pass timing information to the next level and so on.

Jitter: The jitter associated with a timing reference indicates the magnitude of variance, or dispersion, of the signal. Different timing references have different amounts of jitter. The more accurate a timing reference, the lower the jitter value. Jitter is usually measure in milliseconds.

Offset: Offset generally refers to the difference in time between an external timing reference and time on a local machine. The greater the offset, the more inaccurate the timing source is. Synchronised NTP servers will generally have a low offset. Offset is generally measured in milliseconds.

Delay: Delay in a NTP server describes the round-trip delay or latency of a timing message passed from client to server and back again. The time delay is generally measured in milliseconds and is used to calculate adjustments required to account for network delays.

Reference Clock: A NTP reference clock is an external hardware clock that a NTP server utilises for accurate time synchronisation. GPS and radio time and frequency broadcasts are commonly used as NTP reference clocks. The NTP distribution, which is available for LINUX, provides source code to operate a large number of external reference clocks.

MSF: MSF is the call sign of a the UK time and frequency radio broadcast, which is available throughout Britain. The MSF signal is broadcast at 60kHz from Anthorn, Cumbria. NTP server systems utilise the MSF time transmission as a reference for providing accurate time. The term MSF is the call sign of the radio broadcast.

DCF-77: The DCF-77 radio time signal is broadcast from Frankfurt, Germany at 77.5Khz. The signal is a time and frequency broadcast that can be received throughout Germany and much of Western Europe. The broadcast is used by many stratum 1 NTP server systems as a precision timing reference.

GPS: The Global Positioning System (GPS) is primarily intended as a global navigation system. However, GPS also provides a highly accurate precision timing reference that can operate worldwide. The GPS system is widely used as a timing reference for GPS NTP time server equipment.

To conclude, most of the terminology used in computer timing can be confusing and vague. However, most of these phrases are used to describe a relatively simple concept.

http://www.computer-customizing-guide.com/articles

Author Bio & Website: D. Evans provides a technical authoring resource to a number of computer network time and frequency companies. Click here, for more useful information on NTP server solutions.

Please Cast Your Vote for this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated